Have you ever wondered how to operate a forklift? A forklift is a vehicle that can help businesses that have heavy loads that need to be moved. The concept seems simple, but using a forklift requires practice and training to operate forklift and maximize productivity.
If you’re trying to figure out how to use a forklift, you’re in luck. In this article, we will be going over the basic operations of how to operate a forklift.
A standard forklift has a set of basic controls. Knowing how these controls work are essential to operating a forklift in a safe and productive manner
A steering column is used to maneuver left and right, while forward and reverse directions are done via pedals. These pedals are normally located by the accelerator and brake pedals. There may be buttons on the steering column on some models – pushing the buttons or depressing these pedals will shift your forklift in the forward or backward direction.
Forklifts use hydraulics to lift, raise, and tilt the forks. You’ll have one or two black levers. One will control raising and lowering the forks, while the other will control tilting the forks.
The pedals at your feet are the accelerator and brakes. These pedals will either move the forklift forward or help stop the forklift from being in motion.
The parking brake is a secondary rear brake. It locks the back wheels to prevent the forklift from moving. Even if you use the accelerator pedal, the forklift won’t move unless you disengage the parking brake.
Anytime you use a forklift, you’ll need to over some pre-operational procedures. You’ll need to go through a list of what you’ll need to check with the engine on and the engine off before use. Going through a checklist will help you avoid a forklift accident
These are the things you’ll need to check before you turn the engine on. You need to check the levels and the condition of each thing listed.
The condition and fluid levels of everything listed is essential to operate the forklift properly.
You’ll first need to find the shifter, typically found on the left side under the steering wheel. Make sure this is set to neutral. You’ll also need to find the emergency brake and make sure it is engaged.
Put the key in and start the engine.
Once you have the forklift running, disengage the parking brake while your foot is on the pedal brake. Use the shifter lever and choose the direction you want to go to.
Safety should be of the utmost importance when operating a forklift. Always be aware of your surroundings, and never leave the forklift unattended.
If you have any concerns operating your forklift, always consult with the vehicles manual or talk with your supervisor. We hoped this article helped you with how to operate a forklift. For more articles like this, check out our other blogs on our site.
While every wedding-related decision helps shape your special day, there are a handful of considerations… Read More
Even a minor truck accident can have devastating consequences for those involved. If you were… Read More
Being involved in a car accident could be a traumatic experience. It would be more… Read More
Although white-collar crimes are on the decline, as suggested by the US Justice Department, bad… Read More
Marketing and promotion of any product or service is challenging. Not just challenging, in most… Read More