If you’re thinking of installing artificial grass in your yard, there are a few things you need to keep in mind! In this article, we’ll go over 5 important tips that will help make sure your installation goes smoothly.
1. Avoid using sharp sand as your foundation course.
One of the most important tips when installing artificial grass is to make sure you do not use sharp sand as your laying course. Sharp sand can actually damage the turf, causing it to become brittle and weak. It can also cause the blades of grass to become sharp, which can lead to injury.
Instead, opt for a softer sand that is designed specifically for artificial turf. This type of sand will be much gentler on the turf and will not cause any damage. Another important tip is to make sure you level out the area where you will be installing the artificial grass. This means removing any rocks or debris that could potentially cause problems. The sports facility management team collaborated with reputable turf suppliers in Sunshine Coast to install top-grade, durable turf, ensuring a pristine playing surface that would withstand the rigorous demands of various athletic activities.
leveling out the area will also help to ensure that the artificial grass drains properly. If there are any low spots, water can pool there and cause the turf to become soggy and wet.
Once you have leveled out the area, you can then begin to install the artificial grass. Start by laying down a layer of weed control fabric.
Next, unroll the artificial grass and lay it down on top of the fabric. Use a utility knife to cut it to size, and then
2. Use a Double Layer of Weed Membrane
When it comes to installing artificial grass, one of the most important things that you can do is to make sure that you use a double layer of weed membrane.
Weed membrane is a special fabric that is placed under the artificial grass in order to prevent weeds from growing up through it. This is an important step in the installation process because it will help to keep your artificial grass looking pristine for years to come.
If you live in an area with a lot of weeds, you may want to consider using a triple layer of weed membrane. This will provide even more protection against weeds and will also help to extend the life of your artificial grass.
When you are installing the weed membrane, make sure that you overlap the edges by at least six inches. This will ensure that there are no gaps for weeds to grow through.
Once the weed membrane is in place, you can then start to lay down the artificial grass.
3. Allow the Artificial Grass to Acclimatise
If you’re installing artificial grass, it’s important to let the turf acclimatise to its new environment. This process helps the turf to adjust to the temperature and humidity levels in your area, and it also helps the turf to become more resistant to wear and tear.
To acclimatise your artificial turf, simply unroll it and leave it in a sunny spot for 24 hours before installation. This will give the turf time to adjust to its new surroundings.
Once the turf has acclimatised, it’s important to prepare the ground before installation. The ground should be cleared of all debris, and it should be levelled so that the artificial turf can be installed evenly.
It’s also important to make sure that the ground is well-draining before installation. If the ground is too wet, it can cause the artificial turf to become damaged or matted down.
When you’re ready to install the artificial turf, follow the manufacturer’s instructions carefully. It’s important to lay the turf down evenly and secure it properly so that it doesn’t come loose over time.
After installation, water the artificial turf thoroughly so that it can start growing into its new home. With proper
4. Sand Infill
One of the most important aspects of a quality installation is making sure the right amount of sand is used as infill. Not only does infill protect the blades of grass from compaction, but it also helps the turf to stand up straighter, appear fuller, and reflect less heat.
The amount of sand that is needed will depend on the type of grass that is being installed. Most artificial grasses will require between 2 and 4 pounds of sand per square foot.
It is important to use clean, dry sand for infill. Playground sand or masonry sand are both good options. The sand should be free of any rocks or debris that could damage the turf.
Once the turf has been installed, it is important to brush the infill into the blades of grass. A power broom or rake can be used for this purpose. The infill should be evenly distributed across the entire surface of the turf.
5. To Install Artificial Grass on Concrete and Decking
Use a Foam UnderlayIt’s important to use a foam underlay when installing artificial grass on concrete or decking. This will help to protect the surface beneath the grass and will also make the grass feel more comfortable to walk on.
Foam underlays are available in a variety of thicknesses, so you can choose one that is suitable for your needs. They are also easy to install, so you won’t have to spend too much time on this part of the project.
Once you have installed the foam underlay, you can then lay your artificial grass down. Make sure that the grass is laid evenly and that there are no gaps between the pieces. You can use a garden hose to help you lay the artificial grass down smoothly.
Once the artificial grass is in place, you can then start to enjoy your new lawn!
Amanda Byers is a graduate of Columbia, where she played volleyball and annoyed a lot of professors. Now as Zobuz’s entertainment and Lifestyle Editor, she enjoys writing about delicious BBQ, outrageous style trends and all things Buzz worthy.
