Spray painting, cleaning, and inflating tires are just a few of the many activities that your air compressor is capable of. When equipped with the necessary air tools, a typical air compressor can perform various residential and industrial tasks. It’s difficult to conceive of an application or work for which a traditional power tool couldn’t be substituted by a pneumatic tool of similar performance. Compressed air tools have several significant benefits over standard electrically driven equipment, not the least of which is their lower cost of ownership.
What is the process through which air is compressed?
Air compressors are devices that compress air. Air compressors pull in the air via an input valve, compress the air to the desired volume, and then discharge it into a storage tank connected to the compressor. This operation often uses the electric motor that drives the compression process.
A compressed air system might rely on two forms of air displacement: positive displacement and dynamic displacement.
- In this kind of compression, positive displacement compressors drive air into a limited area, generally by the movement of a mechanical device. This is the most prevalent type of compression method available.
- Compared to positive displacement compressors, which physically lower the volume of collected air, dynamic displacement compressors accelerate the air to a high velocity, resulting in a higher compression ratio. The energy released as a result of this increases air pressure.
Air tools are more convenient to use
Air tools are driven by compressed air provided by an external air compressor, which eliminates the need for a bulky internal motor in their design. As a result, air tools tend to be more compact, lighter, and ergonomically constructed than traditional power tools, allowing them to be used for extended periods without the user becoming tired or disoriented. Because of their more compact shape, air tools are often more suitable for usage in limited locations where a more extensive traditional tool would be inconvenient.
The reliability of air tools is higher
Air tools often have fewer moving parts than electrically driven tools, which implies that less can go wrong with them and need less maintenance during their service life. Air tools are more secure. The lack of an electrically driven motor in air tools eliminates the possibility of an operator obtaining an electrical shock due to a malfunctioning tool. It is also safer to use air tools while working in places where combustible gases may be present in the atmosphere or when working in areas where the presence of water, dampness, or water vapour may make it impossible to use an electrical tool.
Air tools are a cost-effective option
Air tools utilise far less energy than their mains-powered equivalents, primarily when used consistently in a commercial or industrial setting. Some situations, such as when high degrees of torque are necessary to tighten or loosen a fitting, necessitate air tools, which are more potent than other types of tools. Compared to traditional power tools, air tools are often less expensive to acquire and replace. In addition, air tools have the added financial advantage of being less tempting to thieves than conventional power tools.
Productivity is increased by using air tools
As a result of its adaptability, power, and convenience of use, air tools enable the completion of difficult jobs more rapidly than traditional power tools, owing to the ease with which one air tool may be swapped for another. For example, using the necessary air tools, it is possible to sand, nail down, and spray-paint a section of garden decking in the shortest amount of time and with the most efficiency.
There are further benefits
There is no risk of electric shock with compressed air tools, making them a safer option than electrical equipment. As a result, air tools are the only viable alternative in locations where power is unavailable. Most of the time, air power tools are more powerful than traditional electric power tools.
> Because air tools have more outstanding torque ratings and RPM (Revolutions per minute), they may complete their tasks in less time.
> Quick release couplings allow you to swap out air tools in a matter of seconds since they are easily interchangeable.
> Thieves find it less appealing because air tools must be used in conjunction with an air compressor to function. They do not sell as quickly as electric power tools.
Hannah Gilbert is a freelance writer who offers to ghostwrite, copy writing, and blogging services. She works closely with B2C and B2B businesses providing digital marketing content that gains social media attention and increases their search engine visibility.