Ever feel like your truck or SUV is a little sluggish, like it’s lost some of that get-up-and-go it had when you first bought it? Don’t worry, it’s not your imagination. Over time, vehicle engines can lose performance due to built-up carbon and exhaust restrictions. But you can get that power back with some simple upgrades like flashark headers and an EGR delete kit.
In this article, you’ll learn exactly how these performance upgrades can boost your engine’s power and efficiency. Flashark headers increase exhaust flow so your engine can breathe better, while an EGR delete kit prevents recycled exhaust from robbing power. Together, these mods can gain you extra horsepower and torque so you’ll get off the line quicker with improved throttle response. Your daily driver will feel like new again.
So if you’re ready to unlock your vehicle’s true performance potential, read on. We’ll walk you through how to choose and install the right flashark headers and EGR delete kit for your specific make and model. In no time, you’ll be enjoying the added power and sound of a free-flowing exhaust on the road.
Flashark Headers: Improving Your Vehicle’s Performance
Flashark headers are one of the best ways to improve your vehicle’s performance. By installing headers, you’re removing the restrictive stock exhaust manifolds and allowing your engine to breathe better and make more power.
Flashark headers are made from mandrel-bent stainless steel tubing for maximum flow and durability. They connect directly to your existing exhaust system for an easy bolt-on installation. The enlarged diameter and smoothed bends in the tubing reduce backpressure, so more exhaust gasses can exit the cylinders. This means your engine doesn’t have to work as hard to push the gasses out, so it can produce more power.
With freer-flowing headers, you may need to re-tune your vehicle’s computer to optimize the air/fuel ratio. But the power gains will be well worth it. On naturally aspirated engines, you can expect 5-15% more horsepower. Forced induction engines like turbocharged or supercharged models will see an even bigger jump in power, around 15-25% or more.
So if you’re looking for one of the best ways to unlock your engine’s performance potential, Flashark headers should be at the top of your list. Coupled with other mods like a cold air intake, performance camshaft, ECU remap or EGR delete kit, Flashark headers will provide huge power gains and an exhaust note to match. Your ride will sound as fast as it feels!
What Is an EGR Delete Kit and Why Consider It?
So what exactly is an EGR delete kit and why would you want one? EGR stands for Exhaust Gas Recirculation. It’s a system that routes some of your exhaust back into the engine’s air intake to be re-burned. The idea is to reduce emissions, but it can rob your engine of power and performance.
An EGR delete kit blocks off this system so no exhaust gets re-circulated. This means:
- Your engine breathes in only fresh, cool air which allows for better combustion.
- Less soot and carbon buildup in your intake and valves.
- Improved throttle response and power. We’re talking an easy 10-15 horsepower gain on most vehicles.
- Better fuel economy since your engine runs more efficiently without the EGR system.
- Fewer EGR related check engine lights and error codes. That EGR valve is one more thing that can fail or malfunction.
Of course, deleting your EGR will make your vehicle’s emissions higher since exhaust is no longer being re-burned. But for a dedicated performance vehicle or race car, an EGR delete kit is a popular mod. If emissions compliance is a concern, you can always reinstall your stock EGR system to pass inspections.
For the shade tree mechanic, an EGR delete is an easy mod to perform yourself with basic tools. So if you’re looking to uncork a few extra ponies from your ride and improve performance, an EGR delete kit is worth considering. Your engine will be able to breathe deep and run free without that exhaust constantly being pumped back into it.
Installing Flashark Headers and an EGR Delete Kit: A DIY Guide
Installing performance with flashark egr delete kit on your vehicle is a straightforward process for the mechanically inclined. Here’s a quick DIY guide to get you started:
Gather Your Parts
You’ll need a set of Flashark headers compatible with your specific vehicle make and model, an EGR delete plate or block off kit, new gaskets, and any necessary hardware. Make sure you have all tools on hand including wrenches, sockets, a torque wrench, penetrant oil, and gasket sealant.
Remove the Stock Exhaust Manifolds
Support the engine with a jack and remove the stock exhaust manifolds. This may require removing motor mounts, oil pans, or other components to access everything. Label hoses and wiring as you disconnect them. Remove the EGR valve, tube, and any related emissions equipment according to the instructions for your EGR delete kit.
Install the New Headers
Install the new header gaskets and slide the headers into place. Hand-tighten the header bolts, then torque to the specifications in your header instructions. Reinstall the oil pan, motor mounts, and any other components you removed.
Button Up the EGR Delete
Install the EGR block off plate or blanking caps onto the intake manifold according the instructions for your specific EGR delete kit. Replace any vacuum lines, hoses or wiring to ensure proper connection.
Start the Engine and Check for Leaks
Start the engine and let it idle. Look and listen for any exhaust leaks at the header flanges or gaskets. Tighten header bolts if necessary. Take the vehicle for a quick test drive to ensure proper operation before enjoying your vehicle’s improved performance and sound!
With some mechanical skill and patience, installing flashark headers and an EGR delete kit can transform your ride. If at any point you feel out of your depth, don’t hesitate to take your vehicle to a trusted mechanic. But with the right tools and know-how, this is a project any gearhead can accomplish!
Black Friday discounts: https://flasharkracing.com/collections/black-friday-sale
Conclusion
So there you have it, everything you need to know about upgrading your ride with flashark headers and an EGR delete kit. If you’re serious about unlocking your vehicle’s true potential and maximizing its power and performance, these mods should be at the top of your list. You’ll instantly notice the difference in sound and feel the boost in torque and horsepower. Your engine will be able to breathe better and run more efficiently. And you’ll have the satisfaction of customizing your vehicle to your own unique tastes. What are you waiting for? Take your tuner project to the next level and experience the thrill of the open road like never before. The power is in your hands – go get it!
Arman Ali, respects both business and technology. He enjoys writing about new business and technical developments. He has previously written content for numerous SaaS and IT organizations. He also enjoys reading about emerging technical trends and advances.
