Are you planning to go through a new central Air Conditioner installation? If yes, then apart from the huge expense, you also need to understand how to pick the right central AC for your home. If you are buying a new central AC for the first time, then you’ll find that the modern AC units are more energy-efficient and can do a damn good job in keeping your house cool.
Now, when it comes to central air conditioning installation Melbourne, there are mainly two types available, ducted and ductless. Ducted air conditioning systems are referred to as the true central air conditioners, while the ductless air conditioners function similar to the central air conditioners just without the ducts, and are more efficient than the Window and Portable AC’s. Lets take a better look at both of these types.
Central Air Conditioning (Ducted)
As mentioned before, the ducted air conditioning system is referred to as the true central air conditioner. It uses uses the ducts to distribute cool air throughout the house. In this system, the refrigerant cools down and dehumidifies the air, then the blower circulates the air through the ducts throughout the house. Lastly, just like every other AC unit, a thermostat maintains the temperature setting you set.
Split AC System (Ductless)
A split ductless AC system has one condenser outside and a compressor, and one to four or more indoor blower units, usually called as air handlers. These air handlers are mounted high on the wall and are responsible for distributing air. Instead of using ducts, this AC system’s indoor and outdoor sections are connected by a thin conduit that houses three things, power cable, refrigerant tubing, and a condensate drain.
This conduit is run through a 3-inch hole that is usually hidden behind each air handler. Every air handler is responsible for cooling the room in which its mounted, and you can easily set the temperature using a remote control.
Make Sure Your Ducts Are Setup Well
If your getting a completely new ducted air conditioner installation done, right from the scratch, then you should make sure that your contractor is calculating the size of the cooling equipment using relevant methods. Any mistakes here can cause you to spend more on energy bills and repairs, so make sure that every step is done with complete focus.
However, if your home already has ductwork for heating purposes, and if you’re just installing a new AC, keep in mind that the ducts used for heating might not be the right size or they may not be placed in the right location for optimal cooling. Make sure to check that duct sections are of proper size and that there are enough space to sufficiently deliver air to the right spots. Keep in mind, if the ductwork is undersized, you may end up with an inefficient and noisy AC system.
It is also very important for you to make sure that the ducts are properly sealed and insulated. If not, the air can escape from the ducts and wasting up to 30 percent of the energy used to cool your house. Remember, sealing your ducts properly can not only keep you cooler in summer, but also warmer in winter.
What To Consider While Choosing A Central AC System?
Apart from the type of AC system and the ducts, there are a few other things that you will have to factor in before choosing your central AC. Lets go over these briefly.
House Capacity
It is extremely important to measure the capacity of your house, and pick an AC system that fits it well. An AC unit that is too small will have to constantly struggle maintain the desired temperature, whereas an AC unit that is too big will cost you more to purchase, and if it does not come with a variable-speed compressor, it will cycle on and off more often that it should, ultimately stressing the system and failing to control the humidity.
In case if you are just replacing your central AC, then consider whether you need the same sized AC unit or a smaller or bigger one. Take into account the changes you may have done in your house. For instance, if you have upgraded your windows or added insulation, this may reduce your cooling needs, whereas if you’ve added more rooms to your house, then more cooling might be needed.
Efficiency
The efficiency of your AC unit is expressed as the seasonal energy-efficiency rating, or simply SEER. The higher the SEER rating, the better the system in terms of efficiency. The systems with higher SEER rating usually costs more, but they do pay for themselves over time as the costs of energy is lower. The minimum SEER rating for an AC unit is 15, while the most efficient models have a SEER rating of 26.
Noise
Another important factor, from a perspective of a owner, is the noise. Many homeowners want their AC unit to be quiet and comfortable. Every manufacturer publishes the noise levels for their specific product across a variety of outdoor temperatures and fan speeds, and is usually measured in decibels. The lower the rating, the better it is, especially if the AC unit is being installed near the bedroom.
Conclusion
When getting a new central air conditioner installation done, it is important to make sure that everything is done right as repairing anything can become a great hassle and can even be costly. Moreover, keep in mind that a central AC unit requires constant maintenance and regular checkups to keep it in optimal shape.
Make sure that you are getting your central ac installed by the professionals only and the product is from a good reputed manufacturer. A good manufacturer usually offers regular air conditioning services, that you should definitely sign up for. All in all, a central air conditioner is a wonderful choice to keep your home cool and a long term solution to fighting heat every summer.
A highly experienced SEO expert with over five years of experience. He is also working as a contributor on many reputable news sites including APNEWS and TECHBULLION
